0

Shipped within 1 day

Garden hoses & fittings

Choose garden hose and fittings for the connection you need. Our range includes 12.5 and 25 mm hose, brass claw couplings, hose tails and plastic push-fit connectors. Check hose size, thread size and coupling type before connecting a hose to a tap, pump or watering wand.

20 products

Gele slang 25mm rol a 25mm

Gele slang 25mm rol a 25mm

0 reviews0 out of 5 stars

Soepele gele gewapende slang met een gebreide inlage.Binnenmaat: 25 mm (1′) Rollengte: 25 m Ook los verkrijgbaar per meter

Read more

87.20

In stock

Compare the three garden hoses

Feature12.5 mm garden hose25 mm yellow hose coil25 mm yellow hose per metre
Hose size12.5 mm25 mm internal diameter25 mm
Sold as25 metre coil25 metre coilPer metre
Practical choiceExisting 12.5 mm hose connectionA longer run with 25 mm hoseA measured length of 25 mm hose

Start with hose size and your water supply

Replacing a hose? Check the existing connection size first. Choose a 25 metre coil of 12.5 mm garden hose or yellow 25 mm hose, sold by the metre or as a 25 metre coil. Measure the actual route and allow room for bends and movement. This helps you choose a useful length without unnecessary loops.

For a new irrigation run, choose the diameter for the required flow, run length and available pressure. A larger hose can reduce pressure loss at the same flow, but does not automatically solve low pressure at the source. Match the pump, fittings and outlets as a complete system.

Hose size and thread size describe different connections. A hose with a 25 mm internal diameter does not mean that the outside of a 1-inch thread measures 25 mm. Record both sizes separately.

Yellow garden hose with separate brass claw coupling and green plastic connector

Claw coupling, hose tail or push-fit connector?

A brass claw coupling joins suitable claw connections with a turning action. A threaded version connects to a tap or component with a matching thread. A hose tail provides the hose connection; match the tail and securing method to the internal diameter and construction of the hose.

Our brass claw couplings come with ¾-, 1-, 1¼- and 1½-inch male or female threads. Hose tails are available in ½, ¾ and 1 inch. Plastic push-fit connectors have ½-, ¾- or 1-inch female threads. Check the coupling profile too: a plastic push-fit connector does not automatically fit a brass claw coupling.

Check every joint before watering

Check hoses, seals and threads for dirt or damage. Assemble each component using its intended seal and securing method. A hose tail needs suitable hose retention; the sealing method on a threaded fitting depends on its design. Tightening harder does not solve a size mismatch.

Open the water supply gradually and check every joint for leaks while in use. The brass non-return valve in this range has two 1-inch female-threaded ports; also check flow direction for your application. Use a verified matching connection for a watering wand and keep the hose free of kinks.

Advice on connecting garden hose

All hose connection guides

Garden hose and fitting questions

Need help with a hose connection?

Tell us the hose size and the connection on your tap, pump or watering wand. Photos of both ends help us identify the components you need.

  • Nergens goedkoper
  • Tot 14 dagen recht van retour
  • Klanten geven Greendiscounter een 9,1/10
  • Veilig online betalen, of ter plekke bij afhalen
  • Discrete & Neutrale verpakking bij verzending
Contact us

Complete your irrigation setup