ERA PVC ball valve 32 mm

Use this ERA 32 mm PVC ball valve to temporarily shut off a suitable section of irrigation pipe. Check the connection and operating conditions before installation.

Isolating a pipe section

Position the valve where the handle remains accessible. Local isolation is useful when maintaining or modifying a connected section. Switch off the pump and release pressure before disconnecting components.

Check size and connection

The stated diameter is 32 mm and the material is PVC. Compare the valve connections with your pipe and other fittings. A metric size is not the same as an inch thread size. Also check the permitted pressure, temperature and fluid in the product documentation; diameter alone does not establish suitability.

Install and inspect

Use a joining or sealing method suitable for the actual connection type. Observe the specified curing time for solvent joints. Support the pipe so it does not place strain on the valve. After fitting, test carefully for leaks and recheck the joints during use.

Compare PVC pipe fittings.